I-Connect007 Editor’s Choice: Five Must-Reads for the Week
August 25, 2023 | Nolan Johnson, I-Connect007Estimated reading time: 3 minutes
Here in the Pacific Northwest, we joke that there are only two seasons: “Winter” and “Road Construction.” Right now, we’re in the middle of Road Construction season. Seemingly every major highway, thoroughfare, and downtown core has big projects underway, racing to finish before the winter rains set in. Inconvenient and congested in the short term, things flow more smoothly once the buildout is completed, so there’s that. But that’s not the only place where I sense this trend.
Is it just me, or does it seem that we’re actively building out supply chain in North America? It’s always easiest to see what’s happening in your own neighborhood, and I happen to live in the United States, so while my perspective might be a bit skewed, I get the sense that Europe is having the same experience.
This week’s editor’s picks come from the top end of reader interest, so I don’t think it’s just me who’s sensing this kind of momentum. For example, we bring you a site visit to one of the newest PCB fabs in North America, and a captive facility at that. Nokia is now manufacturing sophisticated telecom optical components in the United States, and iNEMI publishes a roadmap assisting in specifying the right low-loss material for your particular application, among other topics. To wrap it up, we get NASA news that reminds us that we need not be a big corporation to participate in space programs.
Wearable Technology Market Size to Grow by $52.4 Billion from 2021 to 2026
Published August 21
No, apparently that’s not a typo in the headline for this article. Wearables are not projected to grow to $52.4 billon in the next three years, wearables are projected to grow by $52.5 billion. Exactly how is that expected to happen? Read it here.
A Look Inside SEL’s New PCB Factory
Published August 22
After years of planning, Schweitzer Engineering Laboratories is now manufacturing printed circuit boards in its new $100 million captive facility in Moscow, Idaho. I-Connect007’s Barry Matties recently toured the facility and posts this report on Schweitzer’s approach to building out a state-of-the-art greenfield facility in North America.
Nokia Expands Manufacturing in U.S.
Published August 21
Broadband fiber optical modules seem to be bringing Nokia back to the United States for manufacturing, defying the common belief that manufacturing optical modules is not possible in the U.S. This news item shares details on the “Who, What, Where, When, and Why” factoring into Nokia’s decision.
5G/6G MAESTRO Roadmap on Low Loss Dielectric Materials Characterization Available Online
Published August 18
From the article, “The International Electronics Manufacturing Initiative (iNEMI) announces the availability of the Low Loss Dielectric Materials Characterization Roadmap, which is part of the 5G/6G mmWave Materials and Electrical Test Technology Roadmap (5G/6G MAESTRO).” This resource matters because “advanced low loss materials often come with significant cost adders,” says Intel principal engineer, Michael Hill. Understanding when a design team is either under- or over-specifying material, can be critical in balancing BOM costs and performance.
NASA Selects Small Businesses for Orbital Debris, Surface Dust Tech
Published August 24
From the article, “NASA has selected six U.S. small businesses to receive nearly $20 million in total to advance technologies to address two challenges in space exploration: orbital debris and surface dust. During their contracts, the companies will produce prototypes to be demonstrated or used in spaceflight.
“Our missions require innovative solutions to overcome the complex challenges of spaceflight," said Jenn Gustetic, director of early-stage innovation and partnerships for NASA's Space Technology Mission Directorate (STMD) in Washington. “These small business projects could make big impacts toward solving some of the space industry’s longstanding obstacles.”
There is much more to this story.
Suggested Items
Podcast Review: On the Line with… Designing for Reality
05/09/2024 | Duane Benson, Positive Edge LLCAs a technologist, if I were forced to come up with just one recurring theme that I might call a professional “nemesis,” it would be the difference between theory and reality. A lot of technology we have at our disposal works well in theory but falls short when reality hits. That’s not the only reason I chose to listen to and review On the Line with… Designing for Reality, featuring a series of conversations with ASC Sunstone’s Matt Stevenson, but it certainly helped that the title caught my eye.
NEOTech Positions Itself as Microelectronics Industry Leader with High-Technology Investments
05/09/2024 | NEOTechNEOTech, a leading provider of electronic manufacturing services (EMS), design engineering, and supply chain solutions in the high-tech industrial, medical device, and aerospace/defense markets, announces a significant investment in acquiring new Palomar 8100 wire bonder machines, enhancing the company’s positioning as a leader of cutting-edge microelectronics assemblies for mission-critical applications.
MKS’ Atotech, ESI to Participate in CPCA Show
05/09/2024 | MKS’ AtotechMKS’ Atotech, and ESI will participate in the CPCA Show 2024. The show will be held from May 13 to 15, 2024, at the National Exhibition and Convention Center (Shanghai) and will bring together domestic and international manufacturers in the electronic circuit industry.
Dragonfly Energy Announces Breakthrough in Lithium Battery Production: Eliminating Harmful 'Forever Chemicals'
05/09/2024 | Globe NewswireDragonfly Energy Holdings Corp., an industry leader in green energy storage, has made a significant breakthrough in battery manufacturing with the successful production of PFAS-free electrodes in lithium battery cells.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.