-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
OSP and Selective Electroless Nickel for Mixed-Metal Finish PWBs and BGA Substrates
February 10, 2015 | Michael Carano, OM Group Electronic Chemicals, LLCEstimated reading time: 1 minute
The documentation relating to the requirements for alternative surface finishes have been well publicized at many industry forums. Pressure to eliminate lead in electronics assemblies is forcing fabricators and OEMs to reevaluate their surface finish and joint attachment procedures. Many of the requirements, in fact, are obvious. Regardless, the PWB fabrication industry needs to work closely with contract manufacturers and end users to fully appreciate the true impact of technology trends. These trends are significant and include:
- Surface mount continues to increase at the expense of through-hole with finer and finer features.
- The use of non-tin/lead coatings and surface finishes will increase. Surface finishes such as electroless nickel/immersion gold, OSP and immersion tin will be utilized.
- With political movements toward banning lead in all electronic assemblies gaining significant momentum, lead-free solder pastes and wave solder materials will be adopted.
- The need for more robust solderable finishes under extreme environmental conditions including corrosive atmospheres.
- The alternative surface finishes must perform through multiple thermal cycles with less active pastes and fluxes.
- The use of multiple metal finishes on the same bare board will place new emphasis on the compatibility of coating with each other, and the actual assembly module.
- Increased I/O demand and reduced lead pitch will require much tighter controls over the processes used to fabricate the bare board.
Editor’s Note: This article originally appeared in the February 2015 issue of The PCB Magazine
Suggested Items
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.